§ 16.24.100. Parcel map—Information required.

A parcel map, prepared by a registered civil engineer or licensed land surveyor in compliance with all of the provisions pertaining to the approval of such maps in the Subdivision Map Act, the Land Surveyor Act, and this title, shall be filed subsequent to a tentative parcel map. Such map shall consist of one or more eighteen (18) inch by twenty-six (26) inch sheets with one-inch margin along each side, and shall contain the following information:

A.

General information.

1.

Parcel map number;

2.

Name and address of record owner, divider, and engineer or surveyor who prepared the map;

3.

Datum, north arrow, scale, date and vicinity map;

4.

Numerical or alphabetic designation of each parcel;

5.

Location, name and width of all adjoining streets, alleys or paths, and distance to nearest intersecting street;

6.

Certificates of surveyor, owner, City Engineer and County Recorder and Clerk of the Board of Supervisors.

B.

Record Information.

1.

Location, purpose, and width of all existing public easements;

2.

Name of tract or grant in which survey is located;

3.

Original lot boundaries with lot numbers, as shown in earlier tracts or parcel maps, within and adjacent to boundary or proposed land division.

C.

Survey Information.

1.

Layout of parcels showing bearings, distances and parcel areas. Any discrepancies between field measurements and record data shall be noted;

2.

Identification and location of all pertinent monuments found or set;

3.

Basis of bearing used;

4.

Tie property corner to nearest street intersection (bearing and distance);

5.

Tie property corner to monument line (bearing and distance);

6.

Traverse closure calculations shall be submitted for the map boundary and each component parcel (computer printout preferred).

(Prior code § 7-5.12)